Sanistar 205W

Sanistar is suitable for pumping sewage and waste water from toilets, hand basins, showers and from rooms which are below the sewer level.

If there is natural fall and the sewer is flooded, Sanistar will prevent a backup and flooding of the room. 

Features

  • Flood protected pump station 
  • Odour and gas-tight plastic collecting tank 
  • Flexible union with integrated soft ball check valve 
  • Non-clogging impeller 
  • Fully submersible, pressure-tight electric motors 
  • Thermal sensors embedded within windings 
  • Large diameter stainless steel rotor shaft, pre-lubricated bearings 
  • Combination of mechanical seal (silicon carbide) and lip seal in oil chamber 
  • Electronic control box for controlling and monitoring all important functions and advising any problems


Technical Data

Motor Input (kW) 1.6 Tank Inlets (mm) 100 (x3), 150 (x2), 40 (1)
Motor Output (kW) 1.1 Total Volume 95 Litres
Voltage 50Hz (V) 230-240 / 1 phase Operating Volume 3 Litres
Speed (rpm) 2900 Discharge Flange 80mm
Nominal Current (A) 7.0 Air Vent Size 70mm
Weight (kg) 92Max Head Height 10M
Dimensions Length 750mm  Height 750mm  Width 515mm
ENQUIRE NOW
Wesbite Name: Sanistar 205W

Sanistar is suitable for pumping sewage and waste water from toilets, hand basins, showers and from rooms which are below the sewer level. Even if there is natural fall if the sewer is flooded Sanistar will prevent a back up and flooding of the room. Applications include basement rooms or car parks, sanitary facilities in restaurants, hotels, shopping centres, schools and hospitals.

Height (mm)

515

Width (mm)

750

Length (mm)

750

Total Weight (Kg)

92

Motor Input (kW)

1.6

Motor Output (kW)

1.1

Tank Inlets (mm)

100 (x3), 150 (x2), 40 (1)

Total Volume (Litres)

95

Voltage 50 Hz (V)

230-240 / 1 phase

Operation Volume

45 Litres

Speed (rpm)

2900

Discharge Flange

80mm

Nominal Current (A)

7

Air Vent Size

70mm

Max Head Height

10m