Sanistar 105W

Sanistar is suitable for pumping sewage and waste water from toilets, hand basins, showers and from rooms which are below the sewer level.

If there is natural fall and the sewer is flooded, Sanistar will prevent a backup and flooding of the room. 

Features

  • Flood protected pump station 
  • Odour and gas-tight plastic collecting tank 
  • Flexible union with integrated soft ball check valve 
  • Non-clogging impeller 
  • Fully submersible, pressure tight electric motor 
  • Thermal sensors embedded within winding 
  • Large diameter stainless steel rotor shaft, pre-lubricated bearings 
  • Combination of mechanical seal (silicon carbide) and lip seal in oil chamber 
  • Electronic control box for controlling and monitoring all important functions and advising any problems

Technical Data

Motor Input (kW)1.6Tank Inlets (mm)100 (x3), 150 (x2), 40 (1)
Motor Output (kW)1.1Total Volume70 Litres
Voltage 50Hz (V)230-240 / 1 phaseOperating Volume30 Litres
Speed (rpm)2900Discharge Flange80mm
Nominal Current (A)7.0Air Vent Size70mm
Weight (kg)64Max Head Height10M
DimensionsLength 590mm Height 515mm Width 660mm

ENQUIRE NOW
Wesbite Name: Sanistar 105W

Basement rooms or car parks, sanitary facilities in restaurants, hotels, shopping centres, schools and hospitals.

Height (mm)

515

Width (mm)

660

Length (mm)

590

Total Weight (Kg)

64

Motor Input (kW)

1.6

Motor Output (kW)

1.1

Tank Inlets (mm)

100 (x3), 150 (x2), 40 (1)

Total Volume (Litres)

70

Voltage 50 Hz (V)

230-240 / 1 phase

Operation Volume

30 Litres

Speed (rpm)

Discharge Flange

80mm

Nominal Current (A)

7

Air Vent Size

70mm

Max Head Height

10m