For domestic hot or cold water circulation (supplied with unions)
Features
- In-line stainless steel body circulation pump.
- Suction and delivery pipe material must be either Copper or synthetic material.
- Supplied with unions, cable and plug.
- Maximum working temperature for open systems (65°C) closed systems (110⁰C)
- Three-speed settings
- Maximum working pressure 10 bar
- Motor protection IP44 (must be installed in weatherproof location)
- 2-year Warranty
Installation & Operating Conditions
- Pump must be used only in clean water service without any solids, grit, or dirt
- Pump to be installed such that the shaft is in a horizontal position
- Pump must be installed in a weatherproof location with proper ventilation and easy access
Technical Data
Pump Model | GPD 20-6SB | Input Power (P1) | 55W / 70W /100W |
Power Supply | 1Ph / 230v | Full Load Amps | 0.25 / 0.35 / 0.45 |
Inlet/Outlet | 20mm Bspm (union) | Max Working Press | 10 bar |
Weight (Kg) | 2.75 | Dimensions (mm) | 130 x 130 x 130 |
Note: The above performance chart is measured at pump outlet and based on factory test conditions. Actual performance onsite may differ due to piping and fixture sizing and layout.
ENQUIRE NOW
For domestic clean hot or cold water circulation installed in a weatherproof location with proper ventilation and easy access.
Pump Model
GPD 20-6SB
Length (mm)
130 (Approx)
Width (mm)
130 (Approx)
Height (mm)
130 (Approx)
Weight (kg)
2.75
Inlet (mm)
20mm Bspm (union)
Outlet (mm)
20mm Bspm (union)
Casing Length
130 (Approx)
Casing Material
Bronze
Speeds
Three
Power (W)
55W / 70W / 100W
Power Supply
1Ph / 230v
Full Load Amps
0.25 / 0.35 / 0.45
Max Work Press
10 bar