For domestic hot water pressure due to a low-pressure cylinder and domestic cold water pressure due to header tank supply (supplied with stainless steel unions)
Features
- In-line stainless steel body.
- Easy to install in new or existing pipelines.
- Supplied with unions, cable and NRV
- Maximum working temperature for open systems (65°C) for open domestic hot water circuit & closed heating circuit.
- Can develop Max (S.O.H) pressure of 90kPa Approx
- Low capital / operating cost
- Maximum working pressure 6 bar, Max suction pressure 4 bar
- Motor protection IP42 (must be installed in weatherproof location)
- 2-year Warranty
Installation & Operating Conditions
- Pump must be used only in clean water service without any solids, grit, or dirt
- Pump to be installed such that the shaft is in a horizontal position
- Pump must be installed in a weatherproof location with proper ventilation and easy access
Technical Data
| Pump Model | SM15-9AB | Motor Size (P1/P2) | 120W / 40W |
| Power Supply | 1Ph / 230v | Full Load Amps | 0.5 |
| Inlet/Outlet | 1/2" (15mm) | Max Working Press | 6 Bar |
| Weight (Kg) | 3 (Approx) | Dimensions (mm) | 160 x 125 x 105 (Approx) |
 | ||
For clean water service that can be installed in a weatherproof location with proper ventilation and easy access.
Pump Model
SM15-9AB
Length (mm)
160
Width (mm)
125
Height (mm)
105
Weight (kg)
3 (Approx)
Inlet (mm)
15mm
Outlet (mm)
15mm
Casing Length
160
Casing Material
Bronze
Speeds
Two
Power (W)
120W / 40W
Power Supply
1Ph / 230v
Full Load Amps
0.5
Max Work Press
6 Bar
PRODUCT DATASHEET