Sanistar is suitable for pumping sewage and waste water from toilets, hand basins, showers and from rooms which are below the sewer level.
If there is natural fall and the sewer is flooded, Sanistar will prevent a backup and flooding of the room.
Features
- Flood protected pump station
- Odour and gas-tight plastic collecting tank
- Flexible union with integrated soft ball check valve
- Non-clogging impeller
- Fully submersible, pressure tight electric motor
- Thermal sensors embedded within winding
- Large diameter stainless steel rotor shaft, pre-lubricated bearings
- Combination of mechanical seal (silicon carbide) and lip seal in oil chamber
- Electronic control box for controlling and monitoring all important functions and advising any problems
Technical Data
| Motor Input (kW) | 1.6 | Tank Inlets (mm) | 100 (x3), 150 (x2), 40 (1) |
| Motor Output (kW) | 1.1 | Total Volume | 70 Litres |
| Voltage 50Hz (V) | 230-240 / 1 phase | Operating Volume | 30 Litres |
| Speed (rpm) | 2900 | Discharge Flange | 80mm |
| Nominal Current (A) | 7.0 | Air Vent Size | 70mm |
| Weight (kg) | 64 | Max Head Height | 10M |
| Dimensions | Length 590mm | Height 515mm | Width 660mm |
 |
ENQUIRE NOW
Basement rooms or car parks, sanitary facilities in restaurants, hotels, shopping centres, schools and hospitals.
Height (mm)
515
Width (mm)
660
Length (mm)
590
Total Weight (Kg)
64
Motor Input (kW)
1.6
Motor Output (kW)
1.1
Tank Inlets (mm)
100 (x3), 150 (x2), 40 (1)
Total Volume (Litres)
70
Voltage 50 Hz (V)
230-240 / 1 phase
Operation Volume
30 Litres
Speed (rpm)
Discharge Flange
80mm
Nominal Current (A)
7
Air Vent Size
70mm
Max Head Height
10m
Product Datasheet