Multisan Pro

Fully automatic sewage and waste water pump.

Multisan-Pro is suitable for pumping waste water from toilets, bidets, showers and basins from rooms which are below the sewer level, or conditions where small dimensioned discharge pipes are required.

Features

  • Completely self-contained 
  • Quiet, powerful and fully automatic 
  • Dry mounted motor and pump 
  • Easily installed and serviced 
  • Designed and built in Germany for New Zealand conditions 
  • 2-year warranty 
  • High head and flow 
  • Can be remotely installed (max 900mm from appliance) 
  • Audible alarm and signalling in case of fault 
  • Solenoid valve to isolate the water supply to plumbing fixtures draining to the pump (optional) 
  • Carbon filter for internal venting (Check with your Local Authority for compliance)
Motor Power (kW) (P1)0.6Total Tank Volume11 Litres
Temp Continuous / Max40 / 60°CDelivery Connection32mm BSPf
Voltage 50Hz (V)230IP RatingIP54
Cable (M)1.532mm Swing CheckSupplied
Nominal Current (A)2.532mm Isolating ValveSupplied
Weight (kg)11Overall Dimensions448(L) x 292(H) x 257(W)
                     

Note: The above Performance Graph is measured at pump outlet and based on factory test conditions. Actual performance onsite may differ due to piping and fixture sizing and layout.

ENQUIRE NOW
Wesbite Name: Multisan Pro

Multisan-Pro is suitable for pumping waste water from toilets, bidets, showers and basins from rooms which are below the sewer level, or conditions where small dimensioned discharge pipes are required.

Height (mm)

292

Width (mm)

257

Length (mm)

448

Total Weight (Kg)

11

Motor kW

0.6

Total Tank Volume (Litres)

11

Temp Continuous / Max

40 ⁰C

Delivery Connection

32mm BSPf

Voltage 50 Hz (V)

230

Cable (m)

1.5

Nominal Current (A)

2.5

Swing Check

32 mm Supplied

Isolating Valve

32 mm Supplied

IP Rating

IP54

INSTALLATION INSTRUCTIONS

Download