Hot Pump (HP)

For domestic hot water (supplied with unions 20mm / 25mm)

Features

  • Motor protection IP44 (must be installed in weatherproof location)
  • Maximum temperature for open systems (65°C)
  • Minimum static head must be 2.5m or more for temperatures up to 80°C, 5.0m or more for temperatures up to 95°C and 18.0m or more for temperatures up to 110°C

Installation & Operating Conditions 

  • Pump must be used only in clean water service without any solids, grit, or dirt
  • Pump to be installed such that the shaft is in a horizontal position
  • Pump must be installed in a weatherproof location with proper ventilation and easy access

Technical Data

Item No.HP Power P1 (W)
40W/67W/90W Speed 1/2/3
Inlet (mm)20 / 25mm OptionalPower Supply1Ph / 230v /50Hz
Outlet (mm)20 / 25mm OptionalFull Load Amps0.17/0.29/0.39 speeds 1/2/3
Casing Length130mm W/O UnionsMax Work Press10 Bar
Casing MaterialBronzeWeight (Kg)2.5 (Approx)
Speeds ThreeDimensions130mm x 130mm x 130mm

Note: The above performance chart is measured at pump outlet and based on factory test conditions. Actual performance onsite may differ due to piping and fixture sizing and layout.

ENQUIRE NOW
Wesbite Name: Hot Pump (HP)

For domestic clean hot water installed in a weatherproof location with proper ventilation and easy access. 

Pump Model

HP (20mm union) /HP25 (25mm union)

Length (mm)

130

Width (mm)

130

Height (mm)

130

Weight (kg)

2.5 (Approx)

Inlet (mm)

20 (25mm Optional)

Outlet (mm)

20 (25mm Optional)

Casing Length

130mm W/O Unions

Casing Material

Bronze

Speeds

Three

Power (W)

40w/67w/90w speed 1/2/3

Power Supply

1Ph / 230v / 50Hz

Full Load Amps

0.17/0.29/0.39 speeds 1/2/3

Max Work Press

10 bar

PRODUCT DATASHEET

Download