Fully automatic sewage and waste water pump.
Multisan-Pro is suitable for pumping waste water from toilets, bidets, showers and basins from rooms which are below the sewer level, or conditions where small dimensioned discharge pipes are required.
Features
- Completely self-contained
- Quiet, powerful and fully automatic
- Dry mounted motor and pump
- Easily installed and serviced
- Designed and built in Germany for New Zealand conditions
- 2-year warranty
- High head and flow
- Can be remotely installed (max 900mm from appliance)
- Audible alarm and signalling in case of fault
- Solenoid valve to isolate the water supply to plumbing fixtures draining to the pump (optional)
- Carbon filter for internal venting (Check with your Local Authority for compliance)
| Motor Power (kW) (P1) | 0.6 | Total Tank Volume | 11 Litres |
| Temp Continuous / Max | 40 / 60°C | Delivery Connection | 32mm BSPf |
| Voltage 50Hz (V) | 230 | IP Rating | IP54 |
| Cable (M) | 1.5 | 32mm Swing Check | Supplied |
| Nominal Current (A) | 2.5 | 32mm Isolating Valve | Supplied |
| Weight (kg) | 11 | Overall Dimensions | 448(L) x 292(H) x 257(W) |
 |  |
Note: The above Performance Graph is measured at pump outlet and based on factory test conditions. Actual performance onsite may differ due to piping and fixture sizing and layout.
Multisan-Pro is suitable for pumping waste water from toilets, bidets, showers and basins from rooms which are below the sewer level, or conditions where small dimensioned discharge pipes are required.
Height (mm)
292
Width (mm)
257
Length (mm)
448
Total Weight (Kg)
11
Motor kW
0.6
Total Tank Volume (Litres)
11
Temp Continuous / Max
40 ⁰C
Delivery Connection
32mm BSPf
Voltage 50 Hz (V)
230
Cable (m)
1.5
Nominal Current (A)
2.5
Swing Check
32 mm Supplied
Isolating Valve
32 mm Supplied
IP Rating
IP54
INSTALLATION INSTRUCTIONS